2 Steering Wheels
Turn the front and rear wheels independently. Move diagonally without rotating, or steer them against each other to turn in a remarkably small circle.
Straight ahead
- Center speed
- 0.00 m/s
- Center-path turning radius
- ∞ · straight path
- Front angle
- 0.0°
- Rear angle
- 0.0°
- Rotation rate
- 0.0°/s
- Front rolling speed
- 0.00 m/s
- Rear rolling speed
- 0.00 m/s
- Wheelbase
- 3.00 m
Description
Crab: choose the Crab preset, then hold Space. Both wheels point the same way, so the vehicle travels diagonally while its body keeps the same heading. You can also hold D and → together to create this yourself.
Super sharp turning: choose Tight turn, then hold Space. Opposite wheel angles bring the turning center close to the vehicle. Compare it with Front only. Increase the front angle with D and decrease the rear with ← for an even tighter turn.
Instructions
Click the simulation to focus it. A/D steer the front wheel; ←/→ steer the rear. Hold Space to accelerate forward, R to accelerate in reverse, and B to brake. Angles stay where you leave them. C centers both wheels, X resets everything, and Escape pauses. You can hold the on-screen controls on a touchscreen, too.
What the geometry shows
Blue and green trails follow the front and rear wheels; gold follows the center of the vehicle. The dashed lines are perpendicular to each wheel. Their intersection is the instantaneous turning center. Matching wheel angles make these lines parallel, so the vehicle translates without turning.
This is an ideal, low-speed, no-slip two-wheel model with a 3-meter wheelbase. Steering is limited to ±80°. The faster wheel is limited to 4 m/s forward and 2 m/s in reverse; the other wheel rolls at the compatible speed. Tight turns naturally move the center more slowly. The radius shown is the center's path radius, not clearance for the whole body. Tire skidding, suspension, and obstacles are not simulated.